What do you know about the production process of clothing? Do you know all the requirements and steps of production?(2)

(5) Sewing sewing is the central process of garment processing. Sewing of garment can be divided into machine sewing and manual sewing according to the style and craft style. In the sewing process in the implementation of the flow operation. The application of adhesive lining in clothing processing is more common, its role is to simplify the sewing process, make the clothing quality uniform, prevent deformation and wrinkle, and play a certain role in the clothing modeling. Its types of non-woven fabrics, woven fabrics, knitwear as the base cloth, the use of adhesive lining should be selected according to the clothing fabric and parts, and to accurately grasp the time, temperature and pressure, so as to achieve better results.

(6) Lock eye nail buckle in clothing, lock eye and buckle are usually made by machine, buckle eye is divided into flat and eye hole according to its shape, commonly known as sleeping hole and pigeon eye hole. Sleeping holes are commonly used in shirts, skirts, pants and other thin clothing materials. Pigeon eye holes are mostly used for jackets, suits and other thick fabrics on the coat class. Lock hole should pay attention to the following points:

(1) Whether the cingulate position is correct.

(2) Whether the size of the button eye is matched with the size and thickness of the button.

(3) Whether the buttonhole opening is cut well.

(4) stretch (elastic) or very thin clothing material, to consider the use of the lock hole in the inner layer of cloth reinforcement. The sewing of the button should correspond to the position of the buttingpoint, otherwise the button will not cause the distortion and skew of the button position. Attention should also be paid to whether the amount and strength of the staple line are enough to prevent the button from falling off, and whether the number of buckle on the thick fabric clothing is sufficient

(7) ironing people often use "three sewing seven ironing" to adjust the hot is an important process in clothing processing. Avoid the following phenomena:

(1) Aurora and burning on the surface of the garment.

(2) The surface of the clothing left small ripples and wrinkles and other hot defects.

(3) There are leakage and hot parts.

(8) The inspection of clothing should run through the whole processing process of cutting, sewing, keyhole nail buckle, finishing and ironing. Before the packaging and storage, the finished products should also be fully inspected to ensure the quality of the products. The main contents of the finished product inspection include:

(1) Whether the style is the same as the confirmation sample.

(2) Whether the size and specifications meet the requirements of the process sheet and the sample clothing.

(3) Whether the suture is correct, and whether the sewing is neat and flat clothes.

(4) the clothing of the strip fabric check whether the pair is correct.

(5) whether the fabric silk wisp is correct, there are no defects on the fabric, oil exists.

(6) Whether there is a color difference problem in the same clothing.

(7) Whether the ironing is good.

(8) Whether the bonding lining is firm, and whether there is a glue infiltration phenomenon.

(9) Whether the wire head has been repaired.

(10) Whether the clothing accessories are complete.

(11) Whether the size mark, washing mark and trademark on the clothing are consistent with the actual goods content, and whether the position is correct.

(12) Whether the overall shape of the clothing is good.

(13) Whether the packaging meets the requirements.

(9) The packing of warehousing clothing can be divided into two kinds: packing and packing, and the packing is generally divided into internal packaging and outer packaging. Inner packaging refers to one or more pieces of clothing into a rubber bag. The payment number and size of the clothing should be consistent with those marked on the rubber bag, and the packaging should be smooth and beautiful. Some special styles of clothing should be packaged with special treatment, such as twisted clothing should be packaged in the form of wrung roll, in order to maintain its styling style. The outer packaging is usually packed in cartons, according to customer requirements or process sheet instructions. Packaging form generally has mixed color mixed code, single color independent code, single color mixed code, mixed color independent code four kinds. When packing, pay attention to the complete quantity and accurate color size. Brush the box mark on the outer box, indicating the customer, the shipping port, the box number, the quantity, the origin, etc., and the content is consistent with the actual goods.