What are the common printing techniques of clothing?(one)

1.Gelatin printing
Clothing can not have more innovation in style, choose a new way to do a fashion designer who is good at pattern design is relatively speaking for aesthetic, higher technical requirements, fewer competitors.
Printing design feels relatively pure clothing design, and now the rise of domestic popular logo, need to do more in the brand vision.

I do not need to go to the printing factory often, because I just have the pattern design in the early stage, so make the documents, sort out the pieces and send them, the printing factory can arrange it. The work is mainly to draw, done after sending back can also see what effect, we will regularly about the printing factory to the door. Do you know anything about the printing process? What process is usually used for printing?
There have been done water slurry printing, offset printing, foaming.
I have been involved in watermark, jelly, direct spray and stamping. However, there is no clear understanding of the process needs to be used for different fabrics.
The printing style I make is more slightly fashionable, generally contact is offset printing, watermark, digital direct spray, thick edition, flocking these. But they are all used alone, without doing the combination of the use of printing, we do not know what is the good effect of the combination, or need to pay attention to the place.
The tar printing has a good coverage, can print light pattern on dark fabrics, has a certain gloss and stereo sense, but because of a certain thickness, not too breathable; and also has a certain hardness, it is notrecommended to use large area. But it can be made with a junk effect, which will improve the situation to some extent, or combine other processes. Local glue printing on the water slurry printing can not only retain the better feel but also enrich the level. I contact the most at work is the digital direct spray, most of the glue slurry is only a small area of use.
yes. Offset printing is hard and airtight, which will change the fabric properties. The pulp is suitable for the pattern expression requirements are not high, such as seeking truth, simple color.
Yes, the mortar coating is very good. But the water slurry will be cheaper, the glue slurry has a certain hardness, will make the fabric feel more stiff, airtight, but the color saturation is higher. If it is a high degree of authenticity, I usually do digital direct spray.
The pulp is generally used for logo.
I feel the texture of the offset impression is less pleasing. For myself, I can watermark will not choose offset printing. Perhaps because of the material problem, offset printing to me feel relatively cheap, and some frosted fabrics do offset printing will stick hair.
Yes, considering the feel and texture can also do junk effect, through the bottom will improve this disadvantage to a certain extent, and easy to oxidation hair hard yellow. So I will just print the little logo.
What fabric can offset print? Is it a specific fabric? But now the fabric on the market is very single, basically cotton and polyester.
With silicone oil, the coated fabric is not good.

2. Water pulp printing
Water slurry everyone should understand, should be the cheapest, the most widely used printing technology. Water slurry printing coverage is relatively poor, printed on the dark fabric on the effect is not ideal, suitable for printing on the light color fabric. After printing will not affect the feel of the fabric, very suitable for large area printing. It is characterized by a soft feel and a bright color. But for now, the same pattern, if I use the digital direct spray price of 10 yuan, the watermark can be reduced to 5 yuan.
Is digital low on quantity? Is there a requirement for watermark?
But generally want more than 100 pieces, the watermark can make grey cloth printing, but my grey cloth printing generally do digital or direct spray.
Digital orders are now very low, 100 pieces can be, only for the price.
Next up is a thick plate print. People who do men's wear should understand that women's wear is used very little, and sports clothing is used more. The pattern printed by this kind of printing pulp has a very strong three-dimensional sense. On the basis of the mortar, the normal number of 5-8 times can reach an ideal state. However, I have less contact with women's wear, so I can only print a small logo.
Material of a more hard fabric, or autumn and winter knitting.(Guangzhou) Many hot pictures of the plate are made of thick plate pulp.
At the beginning of contact, I found that some printing factories do not support the process of thick plate glue.
Thick board is the glue constantly thickened, the paint and workers requirements are particularly high, need to be repeatedly brushed in the same position. Therefore, the thick plate glue process requirements are relatively high is easy to cause problems, big factories can do the effect is better.
Are they all handmade? The difficulty is too high, and the output will not be too high. Now that the degree of automation is very high, can't it directly through laser cutting a material to achieve the effect?
Yes, it's all done by hand. Laser is another process and effect.
We sometimes ask the factory to make a version, and we make the front page and press the iron in the craft room for 20 seconds. I thought it was a factory is also a pattern, directly with a big hot hot out.

4. Ink printing
The next one is ink printing, which is rarely used, only when the water slurry or jelly can not be used. First, the price of large goods is not cheap, second, the large goods are relatively not very good control, the overall effect is close to offset printing. But if the fabric is silicone oil, coating, offset color fastness is very poor, with a sharp stroke can scrape off, so a windbreaker generally with ink.
How strong is the ink color fastness? Will there be an ink flavor?
The ink effect is ok, the taste will be a little, but in fact I think most of the prints are a little taste, at least much better than the detergent.

5. Bubble printing
Next up is a foaming print. In fact, you should be very familiar with it, men's wear and sportswear are commonly used.
Foaming is really a good year in 2020, especially popular logo. There may be some brands brought up, you make patterns should also understand the popular. The trend in 2020 is for a small area and multiple locations, such as the popular flowers in 2020, with many foaming flowers and many foaming English characters.
I used the foaming process when I gave this model before, but this year it is very popular grey cloth positioning printing.
What are the advantages of the foaming process?
It is actually the foam containing agent resin brush on the fabric, the printed pattern will bubble up, have the feeling of sculpture. This process is also more suitable for small area, monochromatic use.
Are there any shortcomings?
Foaming is actually from the development of the jelly, so the disadvantage is similar to the jelly. Offset printing can also do pull pulp, turtle crack pulp, interested in you can search their own. The price of foam I have made is about 2 to 5 yuan, I use small area monochrome, different processes will have different textures.